Manual Surface Grinder GM150&GM200
Tsanangudzo
| Tsanangudzo | Unit | Tsanangudzo | |
| Chinhu NO. |
| 121010 | 121015 |
| Model |
| GM 150 | GM 200 |
| The worktable |
| ||
| Tabel pamusoro saizi (kureba* upamhi) | mm | 460*180 | 480*200 |
| Kufamba kukuru kwetafura (kureba* upamhi) | mm | 500*190 | 530*220 |
| T-slot yetafura(nhamba*hupamhi) | mm | 1*14 | 1*14 |
| Kukuya musoro |
|
| |
| Distance from spindle center to worktable | mm | 335 | 450 |
| Kukuya vhiri size(WA46*5V)(OD*Width*ID) | mm | 200*13*31.75 | |
| Kukuya vhiri kumhanya 50hz | r/min | 2850 | |
| Kukuya vhiri kumhanya 60hz | r/min | 3440 | |
| Vertical (kumusoro uye pasi) feed handwheel |
|
| |
| per REV.the handwheel | mm | 1.25 | |
| per DIV.the handwheel | mm | 0.005 | |
| Muchinjika(kumberi nekumashure) feed handwheel |
|
| |
| per REV.the handwheel | mm | 5 | |
| per DIV.the handwheel | mm | 0.02 | |
| Simba remota |
|
| |
| Spindle motor | kw | 1.5 | |
| Inotonhorera mota | w | 40 | |
| Basa nemazvo |
|
| |
| Parallelism of machined surface to base surface | mm | 300: 0.004 | |
| Kushata kwepamusoro | μm | Ra0.32 | |
| Huremu hweNet/Gross huremu | kg | 650/750 | 750/850 |
| Chisingaperi magineti chuck saizi (sarudzo) | mm | 400*150 | 400*200 |
| Yese dimension(L*W*H) | mm | 1550*1150*1590 | 1680*1140*1760 |
| Kurongedza bhokisi saizi (L*W*H) | mm | 1000*1150*1760 | 1140*1250*1940 |
Standard Accessories
| Wheel | 1 pc |
| Wheel balance bar | 1 pc |
| Hoisting set | 4 pcs |
| Tsoko spanner | 1 pc |
| Wheel chuck | 1 pc |
| Wheek dresser | 1pc |
| Level wedge uye screw | 1set |
| Bhokisi rekushandisa uye chipanera chakakosha | 1set |
| Ini mwenje wemwenje | 1set |
| Optional accessories | |
| Permanent magineti Chuck | 1set |
| Muunganidzi weguruva | 1set |
| Wheel balance stand | 1set |
| Kutonhodza uye guruva rekuunganidza michina | 1set |
